Home server rack

How do I build a server rack?

• You must first cut 2x4s based on the measurements above or your own measurements.
• Now you need to assemble the bottom and top (square) frames.
• Then attach the studs to the bottom frame (make sure they are aligned).

How many servers in full rack?

A full rack is usually 42U (42 racks). The number of servers that can be installed in a rack depends on many factors.

What is the size of a server rack?

The standard server rack size is a 19" rack cabinet with rack mounting rails 17 3/4" apart (ie mm) and measured in steps (ie mm) in height.

How does a "rack mounted" server work?

Rack-mounted servers host, run, and manage a business application or act as a data center. To save space and other server resources, a rack server is generally housed in a horizontal rack that can accommodate multiple servers stacked on top of each other at the same time.

What is a server rack cabinet?

Server rack cabinets are standard 19" racks. Typically used to mount servers, monitors, inverters, etc. Server rack cabinets are typically 24" wide and approximately 36" deep, but there are other options.

What is a server rack unit?

A rack is a unit of measure used to describe the height of a server, network switch, or other similar device installed in a 19-inch or 23-inch rack. The unit of measure for height is measured in inches (millimeters) of height. One unit of height is generally referred to as 1U, 2 units of height is 2U, and so on.

What is a computer rack?

An IT rack is a physical enclosure that can accommodate multiple computers or servers at the same time. This is a mounting frame that can accommodate more than one computer or device in various form factors.

What are standard sizes of server racks?

A server rack is a rack specifically designed to store and organize computer equipment. The standard server rack has a 19mm front panel and is available in three standard sizes: 19, 23, 24.

World Wide Web

How many 1U servers will fit in a rack?

A standard rack offers space for 42U. Technically, you can rack-mount 42 1U servers, but you have to consider other devices (routers, switches, cabling, etc.) that take up space. Power consumption is probably a more limiting factor than space requirements, as 42 servers consume a lot of power.

How much space around a server rack?

2U and 4U servers require more rack space. Typical vertical space is 19 inches from left to right. This standard size for rack servers allows for multiple server components. For example, some medium-sized servers can be stacked side by side in the same rack.

How many servers in full rack of lamb

1 full square (8 ribs) is enough for 4 people. It is very easy to cut, so it is usually cut on a table. You just cut between each rib. Cooking while frying.

How many servings are in a rack of lamb?

Bake the rack of lamb. Expect two ribs per person (four servings per square) if you're using American-style lamb, and four ribs per serving if you're using New Zealand or Australian lamb. Spread the sides as you cut the ribs so that the person doesn't snag the second ribs on the shoulder end of the rack.

Racks on racks

How many ribs are in a rack of lamb chops?

There are usually 8 ribs in a full pose, including ribs 6 - 12. Sometimes the cut is only 7 ribs or 9 ribs in the UK, sometimes it is cut into 6 ribs. It can be cut into as many lamb chops as there are ribs. The bones it contains are the ribs and spine.

What kind of meat does a half rack of Lamb have?

The meat in both parts comes from ewes less than a year old, with the younger lambs being pale pink in color than the older lambs, which are more pink in color. How many half lamb chops?

What is an unsplit rack of lamb?

An intact rack of lamb (the ribs on both sides always meet at the top) is sometimes referred to as a "hotel crust." To sum up your best lamb, starting with the neck of lamb, the shoulder portion comes first, then the rib portion, then the sirloin steak, then the rump (aka the tenderloin).

How many servers in full rack of meat

Full Rack - A full server rack is equivalent to a 42U or approximately 6 feet (1.8 m) rack server. Half rack: Half rack of colocation servers equals approximately 18U - 22U, or slightly more than 90 cm of stacked servers.

Computer server

How many 1U servers can a 4242u rack hold?

In theory, a 42U data center server rack can house 42 1U servers, but in practice it can house up to 20 1U servers.

How do I determine the number of servers in my facility?

First of all, you need to know the usable area of ​​your installation and the capacity of each server (server watts). You also need to know the voltage (VAC) of your facility, which is likely to be 120 V or 240 V. Next, you need to determine the number of racks and the number of servers in each rack.

How to calculate maximum kilowatts per rack for a data center?

Then divide the server capacity by 1000 to get the kW per server. After calculating the kW power per server, multiply it by the number of servers in the rack to arrive at the final maximum kW per rack for the data center. 4. Calculate the total number of kilowatts.

How many ribs in a rack of pork spare ribs?

This includes the area behind the shoulder where the sternum meets. This is especially one of the cheapest cuts of pork. However, the amount of meat per side is quite large. A typical pork ribs consists of 10-13 ribs.

Bookcase bench

What is the difference between pork and pork rack?

Like a rack of lamb, a rack of pork is only half the size of a rack of pork. Although it resembles pork ribs, chicharrón contains much more meat and is better for grilling. While many people have their own favorite method, the recipe in this article is my favorite way to grill pork.

How to cook a pork rack roast in the oven?

Instructions Preheat the oven to 450 degrees, place the coarsely chopped vegetables and garlic in the roasting tin, rinse and dry the baked pork well, place the fat grid on it, generously grease the chopped vegetables with mustard (or olive oil), rub the roast with it .

How many servers in full rack of prime rib

Select the size of the roast on the ribs. Count about 2 people on each side. So for six people you need 3 spareribs. You need 7 for fourteen people. If there are less than six guests, it is better to use loose steaks, they are too small, the piece of meat will not be cooked the way you want.

How long does it take to cook a 5 lb prime rib?

His favorite cuisine is Medium Rare Premium Short Ribs - they have a shiny center. You should remove the roast from the oven when the internal temperature reaches 110°C, which takes about 1 hour and 30 minutes for a 5 lb roast.

Home server build

What is prime rib roast?

The spare ribs are a nice piece of meat. Every time they need a really great Christmas roast, they turn to it. A well-cooked rib is juicy, aromatic and not difficult to prepare.

How do you know when prime rib is cooked?

Premium rib is ready when it reaches 115°F for low and 120-130°F for medium. Remember that once the meat is removed from the oven, it will continue to cook. Transfer the roast from the grill to a wooden board. Cover tightly with aluminum foil and let it rest for 15-30 minutes.

How many ribs in a rack of ribs?

The pose has about 11 to 13 ribs. Sometimes, if the ribs are damaged, there may be at least 8 ribs on the grill. Also, don't expect the ribs to produce a lot of meat, as they have more bones than meat.

How do you calculate the number of ribs per person?

10 (people) x 4 (ribs per person) = 40 (total ribs) Now that you have the total number of ribs, you can take that number and divide by the estimated number of ribs squared and round to the nearest number. 40 (total ribs) / 12 (estimated ribs per rack) = ceiling (3rd.

How many ribs per person for a party?

Half of the ribs is enough for two. But always plan accordingly when choosing ribs and other feasts. You don't want to overwhelm your guests and leave so many leftovers, or make the big mistake of handing them a plate, and by the end of the night you will have hungry guests.

How many people will a Spare Rib feed?

The ribs range from 2 to 3 pounds and can generally feed two people. St. Louis style ribs are very similar to ribs. The main difference is that the sternum and cartilage near the ribs are removed in the St. Louis style.

How many servers in full rack of roast

Sometimes you can get extra support under the shelf if you need a load greater than the standard weight supported by the raised floor. Data center map Global location, cloud index and operator with interactive map. with their racks they have about 3,226 servers per rack.

What equipment do you need to install a server rack?

Most types of sliding rails also make it easy for a technician to slide devices in and out as needed for troubleshooting or upgrades. cables All equipment in the server rack requires a power cord, network cable, and other optional cables.

What's an email address

What are server racks and server rails?

Server racks are easy to use and allow organizations to securely house a wide variety of devices. Server racks contain essential hardware, including servers, patch panels, routers, switches, and brackets such as rack rails.

What is the difference between server racks and cabinets?

The differences are usually negligible, except that the shelves are quite open and the cabinets closed. Instead of focusing on the difference between racks and cabinets, organizations should focus on size and capacity as these factors are some of the most important factors to consider when choosing the right server rack.

How many servers in full rack of beef

Popular Server Racks and Sizes How Much U? Height (cm) Width (cm) Depth (cm) 6U server rack (A) 60 45 6U server rack (B) 60 60 9U server rack (A) 60 45 9U server rack (B) 50.

How many ribs are in a rack?

As mentioned above, the number of ribs in a pose depends on the animal. After all, they have different body composition and size, as well as different ways of peeling. The three types of ribs Americans eat most are premium ribs, spare ribs, and rack of lamb.

What is the best depth for a server rack?

Server racks can be 50" deep, but are generally 24" and 48" deep. The 24" rack is ideal for storing network equipment, A/V equipment, patch panels and more. The standard 29" open frame depth is compatible with many Dell, HP, IBM and Cisco servers.

What is the difference between server rack and open-frame rack?

Due to their reduced weight and versatility, open frame racks can reach heights of up to 70U. However, they can be as small as 5U. Server rack cabinets, on the other hand, can be custom 18U or 37U.

How many servers in full rack 2020

Approximately 4042 servers can be installed in a rack. It also depends on the size of the servers, the space between the servers for cooling. Also consider the location of the switches. You are most likely considering 37 1u full rack servers.

What are the benefits of a rack server?

Rack Servers Rack-optimized servers that modernize your data center with performance, resiliency, and scalability for mission-critical business-to-business workloads.

How tall can a server rack be?

Individual server racks can weigh over 300 pounds. and can stand very tall over 7 feet. Server racks are large objects that require a lot of effort when moving, turning corners, climbing stairs and installing in tight spaces.

What is the standard depth for a server rack?

19" server racks can vary in quality. A standard 19" rack is typically 42U high, 19" (mm) wide and 36" (mm) deep. The new server rack cabinets come with adjustable mounting rails that allow the user to position the rails at a reduced depth if required.

What are the dimensions of a standard computer rack?

Definition. Although this is a 19-inch rack, the actual mounting dimensions for a 19-inch rack are 18 5/16 or inch (mm) wide at the center.

What is the standard scale used in architectural design?

In the United States, the standard architectural scale is in inches and feet, while the British architectural scale is in millimeters and meters. French scales offer a third option with units based on centimeters and meters.

What is the size of an architectural plan?

Sizes are determined by a single paper size system based on local usage. The largest paper size used in modern architectural practice is typically ISO A0 (841 mm × 1189 mm or inches × inches), US Arch E (762 mm × 1067 mm or 30 inches × 42 inches), or Large E (915 mm × 1220 inches). ). ). mm or 36 inches × 48 inches).

What are the sizes of architectural drawing?

Size 20" x 30". This is a common dimension often used in construction drawings. It is 20" high and 30" wide. It is often used horizontally.

What are the dimensions of an architectural shingle?

Typical Asphalt Shingle Size: 13 1/4" wide (metric) or 12" (UK) 40" long (metric) or 36" (UK) Thickness is approximately 1/8" although fiberglass shingles are natural and made from thinner shingles than bituminous paper.

What are the standard dimensions of a server rack and tray

Server Cabinet - 42U rack space with fan tray on top. Dimensions = 82 H x 24 W x D (standard 19" rack). SUPPLIED IN WOODEN CASE.

How to use 2 monitors with laptop

What is the standard size of a server rack?

Most rack equipment, especially servers, are 19 inches wide, measured from hole to hole. Therefore, the rack must have a diameter of 19 inches in order to use this technology. Many racks today are 24 inches on the outside.

What size rack do I need for my data center?

The 24" outer width is ideal for data centers thanks to the standard 48" base plate. Data center floor tiles are usually 24 inches by 24 inches. A standard 48" deep x 24" wide rack makes it much easier to adapt your racks to the space available.

What size do server cabinets come in?

Available in server rack sizes from 18U to 42U, the fully enclosed and secure server cabinets exceed OEM airflow requirements. Open frame server racks are a great way to optimize cooling and simplify cabling.

What are the dimensions of a 19 inch rack and rail?

Width: 19" standard EIA rails Exterior Width: ″ - 600 mm Height: - 2000 mm - Racks: 42U Depth: ″ and ″.

Shelves on wheels

What are the standard dimensions of a server rack and stand

Frame width and depth are usually measured in conventional units. The most common standard data center racks are 19 inches wide and 42 U (inch) high. Payload As additional equipment is added to the data center, the network racks must have sufficient payload.

Standard dimensions lwh

However, most local retailers only offer a few standard sheet sizes, usually 1.20m wide and 8m long or less, as an option in stock. Manufacturers also offer custom plus sizes, but these are not widely used and can be more expensive. Standard plywood size chart.

How to measure length width and height?

You can also ask how to find the length, width and height. To measure the length, width, and height of shipping boxes, use a tape measure or ruler to measure the length of the longest side of the package. This will be your height. Then measure the shortest side of the envelope or the width.

How do you measure width and length?

You can measure the length, width, and height of any object with a measuring tool, such as a ruler or tape measure. Placing an object on a flat surface also yields more accurate numbers.

Is length and width the same thing?

The length and width of the square are the same. The box has three dimensions to indicate the size. The three dimensions are the length, width and depth of the box. The great size of a standing person or a tree is not called length, but height.

What order is length width height?

Measure both sides (length, width, or height) of an object or surface for a 2D measurement. For example, a rectangle 1.2 m wide and 1.2 m high is a two-dimensional dimension. After that, the dimensions of the rectangle are shown as 3 feet (width) by 4 feet (height).

What are the standard dimensions of a server rack and storage

Frame width and depth are usually measured in conventional units. The most common standard data center racks are 19 inches wide and 42 U (inch) high.

What is the standard size of a furniture?

Standard furniture Dimensions (inches) Tables Height Width Length Bedside table 26 15 19 Sideboard 3448 24 60 Menu 30 36 36 Cafeteria 19 18 3648 Meeting room 30 36 96 Dining room 29 40 6428 Living room 27 15 55 Kitchen 29 36 60 Picnic 28 36 72 Poker 29 48 48 Printer 26 22 26 Bench 26 14 72 Typewriter 25 18 30.

Cord management ideas

What are the dimensions of furniture?

Sizes vary from manufacturer to manufacturer as the focus is on office furniture that meets the needs of users. Traditional desk: 48" wide, 30" deep, 30" high. Office chairs: 20" to 22" wide, 36" high. Computer seats: 48" wide x 36" high.

What are the dimensions of a standard bed frame?

The standard bed frame is 54" wide and 75" long. There can be some variation, especially with adjustable bed frames that convert to a king or queen bed, or shrink to 80" twin beds, which is the usual length for them.

What is standard end table dimensions?

Standard side tables range from 22" to 30". With the armrests of the sofa from the middle to 25 inches, this means the side tables can be placed over the end of the sofa. The side table should be at or below the highest point of the arm.

What are the measurements for a server rack?

The Electronic Industries Alliance (EIA) standard server rack is a 19" rack cabinet with mounting rails 17 3/4" (mm) apart, measured in units of ″ (mm).

What is a data center server rack?

A data center rack is a type of physical steel and electronic structure designed to house servers, network equipment, cables and other IT equipment in a data center.

What is a blade server rack?

A rack server is a server housed in a standard 42U rack unit, with a typical server starting at 1U and going up. A blade server is a small server that is part of a rack-mount chassis and does not have its own network connection.

How does a " rack mounted" server work on ebay

eBay offers a wide variety of used server racks at affordable prices. You can find small units, such as 6U server racks, to house some servers and network equipment. You'll also find larger racks that can safely house 40 or more hardware units and take up less space.

How many devices can a server rack hold?

You can find small units, such as 6U server racks, to house some servers and network equipment. You'll also find larger racks that can safely house 40 or more hardware units and take up less space.

What can you Mount on a 2 post rack?

In addition, two-post racks are ideal for installing shelves that support non-rack devices. You can also mount servers in two-post racks if the total weight matches the capacity.

What is an enclosed frame server rack?

Server racks that are shielded from all four corners are called "closed frames." They are available with locks with one or two latches on the front, back or both. Due to the extra metal, closed frame racks are slightly more expensive and allow less air to pass through.

What is a rackmount server?

A server console designed for a rack server is delivered as a horizontal factor, each with its own processor, motherboard, memory, and other input/output (I/O) resources. Each rack server can operate independently, but a base chassis is required to provide power, cooling, and structural and mounting support for the server.

What is a 2U rack-mounted server?

In other words, a 2U rackmount server is in the form of EIA specifications, product thickness in cm. Rack servers are servers that can be installed in a standard 19-inch industrial cabinet. The purpose of using the Cabinet version is to install more servers within a limited space.

What is a server Jack used for?

SERVER SOCKET DATA CENTER SERVER SOCKET FOR QUICK AND SECURE INSTALLATION RackLift ™ is specially designed to facilitate server deployment. Due to the size and weight of rack-mountable communications equipment, modern data centers must be moved from servers using the data center server socket for security reasons.

When do you need a quiet server rack?

When you need a break! Get started more efficiently without annoying server noise. Order the UCoustic™ or AcoustiQuiet™ Quiet Server Rack for maximum noise reduction and heat dissipation. These quiet and soundproof server racks and cabinets turn your loudest server into a silent whisper.

How does a " rack mounted" server work on amazon

The Rack PDU provides a cost-effective solution for power distribution in a server rack or 8-outlet (120V / 15A) enclosure.

What power distribution unit is compatible with my server rack?

1U Rack Design - Compatible with all 19", 4" and larger server racks, this horizontally mounted PDU fits into many network racks and has a 6m built-in power cord.

How to demolish walls in rust

How many outlets does the rack mount power strip have?

Energy and charging. This rack-mount extension cable has 8 additional NEMA 515 outputs (120V/15A) and a 1.8m cable, so you can connect your devices while keeping the rack mobile.

How does a " rack mounted" server work on pc

How Rack-Mount Server Computers Work Rack-mount server computers are stacked on top of each other in racks. Since computers can generate a lot of heat, the rack must be placed in a special room where the temperature is kept cool to keep the computers cool and running efficiently.

How do I mount a server on a rack?

How do I mount the server in a rack? 1 Make sure your server is large enough to fit in your data center rack. 2 Attach the rack rails to the server rack step by step according to the control menu. 3 Place servers or other network devices on the rack rails.

Can you put a rackmount server in a tower chassis?

All internal components can also be vertically integrated into the tower frame. If you are 100% sure that your server will always run on its own, rack and tower kits are ideal. Basically, they give your rack server a tower server form factor.

Throwaway phone number

What is a server rack and how does it work?

A server rack simplifies the management and organization of various components required for network and computing operations. Because the resale market is large and server components have a long lifespan, people find themselves in situations where they own a server but don't necessarily want to invest in a rack.

What is a universal rack to Tower kit?

Basically, they give your rack server a tower server form factor. Any server with a height of 1 to 2 units can be easily integrated into the versatile tower rack kit. They exist mainly because the waiter is more comfortable being tall and slender than flat and wide.

Do I need a rack mounted server?

Rack-mountable servers don't always have to be rack-mountable. A server rack simplifies the management and organization of multiple components required for network and computing operations.

How many BTUs does a server rack have?

These air-conditioned server racks are designed and manufactured to meet NEMA 12 standards for dirty environments or low ambient temperatures. More than 112 sizes of rack or side-mount air conditioning server cabinets are available with BTUs ranging from 2K to 20K.

Does rackmount support Planned Obsolescence?

Planned obsolescence is not part of the Rackmount Solutions mindset. You focus on the U so you can shop, save, and move on to the next project with confidence. Who buys A/C server racks? Fortune 500, manufacturing, education, government, military, finance, law, medicine, communications, retail, non-profit, energy, aerospace/defense.

Are rack to tower servers worth it?

If you are 100% sure that your server will always run on its own, rack and tower kits are ideal. Basically, they give your rack server a tower server form factor. Any server with a height of 1 to 2 units can be easily integrated into the versatile tower rack kit.

What types of rackmount servers do they offer?

Choose from a variety of 19 industrial rack server options. They offer several pre-configured servers with rack-mountable motherboards in 1U, 2U, 3U, 4U, and 5U server enclosures. Their rack-mounted servers are equipped with the most trusted component manufacturers in the industry.

How do you mount a PC on a server rack?

Shelf and rail kits are available that can be added to most standard server racks for easy mounting on a PC. Monitor, keyboard and mouse cables can be routed under the floor, through the ceiling or behind walls.

What is a server rack and why do you need one?

If the computer is simply placed on or under a table, it could fall over, be hit by water or other liquids, or otherwise be damaged. On the other hand, it is always firmly fixed in a server rack.

Can I convert my PC from tower to rackmount?

There are several factors to consider when converting your PC from a tower to a rack-mountable PC, or when rebuilding a rack-mountable computer from scratch.

How does a " rack mounted" server work on 2

To mount a regular server in a 2-post rack, you'll need one of their conversion kits. These kits include brackets that can be connected to the 2-post rack. Each side of the rack has two rails that run in both directions.

Can I use a flush mounting bracket for my server?

If you opt for a recessed mounting bracket, make sure your two post bracket rests on the floor. This is usually done by screwing the bracket to the floor. Center-mount conversion kits help distribute the weight of the server, even in a 2-post rack.

What type of server rack should I buy?

Open frame shelves provide more air circulation and space, while closed frame shelves increase safety. You will most likely need a two-post rack (for telcos) if you are building lightweight equipment and a four-post rack for full-size servers. Please check the height, width and weight requirements of your equipment before purchasing.

What are five most common uses for a home server?

5 The most common NAS or home server uses a file server. One of the main uses of a home server is to host files stored on a central server (your home server) and share them with other devices on the network. Network storage / backup. This use of the home server is the opposite of the first and focuses more on keeping a copy of your important files and folders. Download server. Home multimedia server.

How to build your own home server?

• Find the right design. Depending on your budget and schedule, you can upgrade your existing home or work computer or build your own server from it.
• Choose a motherboard.
• Processors and server design for small businesses.
• RAM and motherboards.
• Turn on your server.
• Find the perfect storage.
• Other considerations to explore.

Which OS is best for Home Server?

FreeNAS is the number one recommendation for home server operating system by many people with home and small server experience. FreeNAS is the most popular server operating system and is aimed more at advanced users, so it shouldn't be recommended for those just starting out with a home server.

Hdmi Hot Plug Detect

What is the best home media server?

Along with Plex Server (arguably the best home media server), it is probably one of the best operating systems for media server applications. It is also compatible with MiniDLNA. OpenMediaVault is a NAS solution based on PHPAJAX.

What is rack PC?

A computer rack (commonly known as a rack) is a metal frame used to house various hardware devices, such as servers, hard drives, modems, and other electronic devices.

Why would you use a home server?

A home server is a server that is used in an apartment and serves the people who live in it. A home server is a convenient way to access these items on various devices you already have, such as smartphones, tablets, laptops, multimedia devices such as iPods, or even some types of televisions.

What is a Windows Home Server used for?

Windows Home Server helps families and small businesses with multiple computers organize, share, and protect important photos, videos, music, and other documents. Windows Home Server automatically backs up all home computers, monitors network health, and provides highly scalable centralized storage.

Two monitors

What you need to build home server rack

To build your own rack server, you'll need these three items. 1. RAID controller card. Better to buy an eight-port RAID card to support all SSDs; otherwise, you may need to purchase a new RAID controller for each SSD you install in the rack.

How to choose the right server racks for your building?

Choosing the right space in your building is essential. First, the space must be as secure as possible, as server racks often contain valuable equipment with critical business data. Rooms in the middle of a building are often ideal because they have no windows.

What do you need to buy for a home server?

DISCLOSURE: This post may contain affiliate links, which means that when you click on the links and make a purchase, you will receive a commission. If you are a fan of the Internet, you must be in love with home servers. But first you need a server rack that is big enough for your home server.

What is the best way to mount a server on your desk?

These are brackets that you can hide in the ceiling, store under a table or place outside without being too visible. When it comes to desktop servers, rack and tower kits or desktop racks are the best options.

Is it difficult to move a server rack?

Once you've decided to install a server rack in your home or office, it's important to plan to avoid mistakes. Once a server rack is installed, it can be difficult to move. When setting up a new server room, the first thing you need to know is how to set up the server rack. Follow these 10 tips for a successful server rack configuration:.

What are the benefits of having a home server?

Wiki's answer. The main advantage of having your own server at home is an educational resource. You will learn a lot about configuring and managing it. It is also useful as a development platform or test environment. However, if you need a server for production work, the server must have redundant power supplies and redundant Internet connections.

What is network rack?

A network rack is essentially a standalone rack that allows you to easily mount active electronic devices (routers, switches, hubs, DVRs) and inactive devices (patch panels, rack shelves, cable management) in a rack so that they can be used to support the technological infrastructure of an extensive network system.

How to set up a home server?

• Computer
• Fast network connection
• Network router with Ethernet cable (CAT5)
• Monitor and keyboard (for beginners only)
• A CD/DVD reader/writer is useful if you want to use your server for multimedia.

Bar top height

What should I do with my Home Server?

• Stream media to televisions and devices. This is probably the most popular use of the home server and is used by many people even when it isn't.
• NAS / Home File Server. Many people are just starting to see the point of using a file server or NAS.
• Own web server at home.