Pintar Bicicleta

What to paint to paint a bicycle? 3

Painting pictures

Fano Gallo text and photo (May / 2005)

I'm sure in some tips, help your bike look good there. Before using corn for ■■■■■■, you need to prepare a box for repainting. Best choice for old paint cleaners: sandblast or sand.

If either Frame to Iron or with some Iron League (chromomolidenio for example), it could send you blasting. To find this service, visit a metallurgical or factory that works with Metais and see how to provide it. Blasting ہے Made with glass microspheres (thin sections) or knots. Our outing is 5 to 10 Reis. But beware, if it is aluminum or frame, you should be sanded and never blast, peas or jets can cause microcracks, not frames.

For aluminum, use the following days in the following order: 220/360/400/600/800 and 1200 (each sandpaper comes with a £ £ number or part of a triangle).

Just like 220 and 360 and 400 sand paper, sand paper or frame, our canteen includes the whole weld seam above. No previous painting can be ink or NDO.

Just like a single tap or other finished sandpaper on the 1200, for example, feels like a paper or two-finger tap is above the best level to get the paint work done.

For sanding, always dip the sandpaper in a bucket of water, whenever it eats it dry.

Touching two fingers makes a sound where you didn't spoil it.

The dubbed painting may or may not contain nail polish. If you decide to send a color, send a ready-made drink around the nail, specify the color of the shadow, and discuss the price, pea or piece of what to prepare. To get the ■■■■ you need to paint and make winter. It will be named after Coleos and After with stickers.

This is called paint, you should first apply the endo (epoxy paint or gray cast primer or skin color) to paint the desired color.

Or you know a paint ■■■ compressor but I can't, buy a spray can of your favorite color. They are also slightly liquid naphthas.

Wash the soap from the cave like a prepared can and rinse well, hang the piece (so as not to use or take a picture of the piece), dip it around a piece of wool or in a naphtha. The back is not square which means you stop there (or you get lost and leave it in one place, but it evaporates very quickly).

Prepared by the piece to get the ink, put a non-stick dust in it and no local number to hang the air.

This is not a practical element with paint, any gluing and the first day we jet and a spot. Either right Â کریں Use the socket intermittently, ie the sound NO or Safe or Trigil opens immediately, the Vai sound removes the ink in a separate socket or prevents the ink from flowing.

The first day of Caa de Ndo. Then check the cans for drying equipment, usually 24 flush.

After drying, leave a can of paint on for about 4 or 5 minutes, or spray the paint as a guide for using the compressor and rev (follow manufacturer's or manufacturer's instructions).

At a distance of 15 to 25 cm, apply a few dots of paint before parting, you don't say or start painting all the time, just to make a dirty or a can of paint base, huh? Just put a few sprays on each piece, wait 5 to 8 minutes before entering the area where you are in the picture. It is applied either evenly, where the difference between ordinary spray is uniform, the other is crossed or saved: first you always paint the piece diagonally in the frame and then straight (or so) On the contrary).

After painting, I let myself rest all night. Repetition involves operation or application, but the layer of paint, with no cut or light sandpaper 1200, peels off.

In other words, apply the varnish to the can or use a ■■■ before you start applying, you should send this phase with sandpaper 1200 to paint, mold or polish it There is also varnish.

With the piece, it must be completely vague to accept or destroy. Then, in another varnish crusade (mentioned above) and let it go again and again so that you can ride a motorcycle.

It is difficult to re-dissolve the ink to re-apply the second ink).

It took some time for Automotive Paint 2, for roads or SDSs that are not wrapped in tree trunks or wrapped in rocks, but no burgundy. However, you should be more careful with this type of paint, but it is easy. Be careful or raft as it is not a risk for you to paint or paint.

There are also more electrostatic paints (some used in metal parts factories) where the parts are painted on kilns and they are much more abrasive than automotive. There is no SP entrance fee, about 20 reais, one painting (need to send or square ready to paint). Just grab the paint you see on Caloi or Sundo bicycles.

I hope that somehow it has helped people who want to see the same old bike, always look new.

(Or the first answer may be without hair. I either skip everything or show it in text and font.)

Pintar Bicicleta

Parabens replace the material.
You can see the time and money or just paint or paint on your bike, great.
© When buying one or your money.
Before using corn for ■■■■■■, you need to prepare a box for repainting. Best choice for old paint cleaners: sand blast or sand.
If either Frame to Iron or with some Iron League (chromomolidenio for example), it could send you blasting. To find this service, visit a metallurgical or factory that works with Metais and see how to provide it. Blasting ہے Made with glass microspheres (thin sections) or knots. Our outing is 5 to 10 Reis. But beware, if it is an aluminum frame, you should send it and never ■■■■ it up, peas or jet non-frame can cause microcracks.